Plug the cable from the interface box into of your mac

The Wacom tablet comes with a small interface box with a DVI video output and a USB output. Plug the USB cable into a free USB port on the computer. There are two included video cables with the Wacom, a DVI-to-VGA cable and a DVI-to-DVI cable. If you have a DVI port on your PC, that’s the preferred connection. The DVI output will  provide better calibration, less flicker and tighter alignment of the pixels and screen output.There is a switch on the interface box that must be manually set to DVI or VGA. Make sure it is set correctly for the cable you are using.Plug the USB cable from the interface box into the USB port of your mac.There are two included video SFP Plus cable with the Wacom, a DVI-to-VGA cable and a DVI-to-DVI cable. On a mac with a mini-display port, you will need a converter cable. The mac supports converting its minidisplay port to either VGA or DVI, but DVI works better. The DVI output will  provide better calibration, less flicker and tighter alignment of the pixels and screen output. There is a switch on the interface box that must be manually set to DVI or VGA. Make sure it is set correctly for the cable you are using. See the PC section above for a photo of the switch.

Direct Attach Cables (DAC) are high performance integrated duplex data link for bi-directional communication. And a SFP+ Direct Attach cable, also known as Twinax cables, uses SFP+ MSA and copper "twinaxial" cable with SFP+ connectors on both sides, ODU gives provides 10 Gigabit Ethernet connectivity between devices with SFP+ interfaces. SFP+ Direct Attach Copper Cable is expected to be the optimum solution for 10G Ethernet reaches up to 10 m.1.10GBASE-T commonly used for 10MB, 100MB and 1GB network connections, while SFP+ Direct Attach Cable only for 10Gigabit Ethernet Network. And 10GBASE-T also support much longer distances than SFP+ Direct Attach Copper Cable.