Popular Posts

Sunday, September 8, 2013

The QSFP package enables our customers Optical Engine

Fourté creates complete mechanical enclosure solutions for the Quad Small Form Factor Pluggable Plus (QSFP / QSFP+) transceiver module. We can create custom designs to accommodate your specific needs while remaining compliant with the QSFP / QSFP+ Multi Source Agreement (MSA).
Following whole 10G optical transceiver successfully released, Quad Small Form-factor Pluggable  QSFP to CX4 optical transceiver has become available in March.QSFP solution is designed for high-density applications. Components of the system include the Electro Magnetic Interference (EMI) shielding cage, active optical cables (AOC), passive copper cable assembly, active copper cable assembly, optical MTP cable assembly, optical loopback, 38-circuit SMT iPass? host connector, and stacked integrated connectors and cages.

QSFP cables (Quad Small Form-Factor Pluggable) is an expansion to the established I/O interface system SFP+ and enables data transfer at 4 x 10 Gb/s in each direction with form factor 4X. The innovative connector plug design replaces the CX-4 standard for SDR (Single Date Rate) and DDR (Double Data Rate), expanding the specifications to include 470-4425 high-frequency QDR (Quad Data Rate) applications. The copper-based solution designed by LEONI is not just raising the bar with unrivalled NEXT characteristics and self-damping, but also with its extremely small diameter which is 20% below industrial average.

Friday, September 6, 2013

something like the MINISAS Expander to provide

I bought some mini-sas to 4 port SATA cables today, but they didn't seem to work with the backplanes, the drives were not detected, but from a bit of research, I found that there are two types of cables, one which works with MINISAS on the host side, and SATA on the target side, and another which does SATA on the host side, and MINISAS Cable Assemblies adapters at the target side. I will search for the SATA (host) to Mini-SAS (target) cables.You can try Molex or Amphenol. These are a couple of the biggest connector and cable manufacturers. Molex is the company that came up with the MINISAS connectors and cable system. Digikey or Mouser may have cables? maybe? You are correct, most go from mini-sas host to SATA drive. You basically want pass though type cables. I do not know if Adaptec, 3ware, LSI, etc sell cables separately... but if they do, they may have 6.0 Gbps in order ones that are pass though... then again, this is not the normal configuration. A detailed forum about the HP expander is available here.I mentioned backplanes only because some have embedded expanders that allow them to accommodate more than 4 or 8 drives. You're probably not working with a system with a SAS backplane, so disregard that part and focus on expansion at the RAID card level.

Thursday, September 5, 2013

QSFP cables Gigabit Ethernet, remains popular for traditional

Specifically optimized for bandwidth-intense applications, the QSFP cables interface offers the scalability and flexibility required to support emerging 40-Gbps communications standards such as QDR InfiniBand and 40-Gigabit Ethernet. Amphenol’s precision-engineered QDR InfiniBand qualified QSFP cables series is manufactured by Amphenol High Speed Interconnects (AHSI) of Endicott, New York.InfiniBand is widely considered the interconnect method of choice as it pertains to High Performance Computing applications such as advanced weather forecasting, oil and gas exploration, quantum physics experiments, gene sequencing and biochemical modeling. InfiniBand’s closest competitor,QSFP cables Relate Products Gigabit Ethernet, remains popular for traditional TCP/IP based networking applications in which signal latency and packet losses remain acceptable. InfiniBand, by comparison, was specifically conceived to guarantee in-order packet delivery with absolutely zero dropped packets and extremely low latency characteristics. Such strenuous performance requirements demand the With Lightpipe use of high-quality InfiniBand qualified hardware, such as Amphenol’s aforementioned 40G-IB-QDR Certified InfiniBand Cables.performance characteristics such as cross-talk, EMI, and insertion-loss must be tightly controlled. Amphenol has thoroughly addressed these issues by embracing its long-held culture of engineering excellence from concept-to-production.”

Wednesday, September 4, 2013

QSFP formats using SFP Total Wizard softwar any transceiver

Additionally, the QSFP design supports Ethernet, Fibre Channel, InfiniBand, and SDH/SONET with data rates up to 10 Gbits/sec per channel. The QSFP to XFP Cable platform demonstrates potential for aggregated higher volumes and improved economics realized from several protocols/applications using the same transceiver. The QSFP MSA is the world's first Z-pluggable parallel optical transceiver with multi-vendor support offering customers a variety of purchasing options.In addition, the inherent 4+4 channel architecture of QSFP lends itself to increase distances supported by multi-lane serial I/O electrical interconnects like PCI Express (PCIe) and InfiniBand.

With the help of programmer PG-4GSXQ you will be able to read and program transceivers of GBIC, SFP, SFP+, QSFP formats using SFPTotal Wizard software. The programmer supports the special instructions and is able to implement an algorithm to program almost any transceiver.The QSFP Transceiver Module is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP) optical module. It provides increased port density and total system cost family includes savings. The QSFP full duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate data rate of 40Gbps over 100 meters of OM3 An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. Proper alignment is ensured by the guide pins inside the receptacle.


Tuesday, September 3, 2013

from special strong connectors and armored fiber optic 10G cables

Armored fiber optic patch cables can be created similar outer diameter using the standard patch cords, this make them space saving. What is more, they may be with various jacket colors and jacket types for example OFNR etc.New Macrobend Resistant Multimode Fiber Teraflex 10G cables SFP+ Active DAC Improve Attenuation Performance And also the armored fiber optic patch cables are actually light weight, and could be with many kinds of terminations. As a sort of armored fiber optic patch cables, 10G cables armored fiber optic patch cables provide 10 gigabit bandwith speeds in high bandwidth applications and they are Five times faster than standard 50um fiber cable. FiberStore supplies OM4 fiber patch cable with various and connecters using the wavelength 50/125.

Monday, September 2, 2013

The SFP cable assemblies are high performance understanding the differences

SFP Cables (Mini-GBIC Cables) Factory Direct from Amphenol [15% OFF SALE] - Genuine Amphenol SFP cables offer an ultra-high performance, cost effective copper interface solution for gigabit speed applications in switched fabric I/O, switches, routers, data storage arrays, and high performance computer (HPC) clusters. All of our SFP cable feature Amphenol brand SFP cable for Twinax cables connectors for the most reliable connection possible.The Sealed SFP optical and electrical integrated assemblies are designed to maximize valuable space on the PCB while providing an environmentally rugged interface. Featuring a panel feed-through design, the assemblies incorporate an internally-mounted SFP cage and related electrical circuitry.

Sunday, September 1, 2013

The new cable systems being deployed are 10G cables enabled

This growth in the number of users globally did have a major impact on growth of technology  speeds in the core telecom backbone.  A decade back the telecom technology was limited to SDH, and speeds like SFP+ Plus 10G cables was the only capacity needed by carriers for their core backbone. Those days the number of internet users were much lesser even an enterprise would only need speeds from an E1 to STM-1 for internet or event for their private networks. So a small backbone was a direct result of the need those days. The 10G cables systems also laid during the phase supported these speeds only.

Friday, August 30, 2013

those designed to support rates in the range of 10G cable

10GBASE-T or IEEE 802.3an-2006 is a standard released in 2006 to provide 10 Gigabit/second connections over unshielded or shielded twisted pair cables over distances up to 100m(330ft). The twisted pair cable is typically comprised of four twisted pairs of 10GBE XFP TO XFP COPPER 10G Cable under the same jacket, but divided into four individual quadrants separated by a plastic spine extended throughout the entire length of the cable.   Each of these physical form-factors is defined in a standards document know as a Multi-Source Agreement, or MSA. Optical Transceivers types can be generally grouped into those supporting transmission speeds on the order of 1Gbps and those designed to support rates in the range of 10G cable. Optical transceivers form factors associated with 10Gbps transmission are: XFP, X2, XENPAK and SFP+.Some manufacturers of cable are able to achieve the 10G cable with unshielded twisted pairs, while other manufacturers construct their cable with twisted pairs wrapped with a foil shield.  CAT6 cable can be used in a 10G application, but there is a distance limitation of 55M (180ft).  To reach full 100M (330ft) length, CAT6A cable must be used to comply with 10G specifications.  CAT6A or CAT6 “Augmented” is the recommended cable for Ethernet standards 10G networking applications.Fiber Optic Transceiver module is a self-contained component that can both transmit and receive.

Thursday, August 29, 2013

The hybrid AOC assembly transitions a single QSFP+ Cable port with four

“This new AOC fanout assembly from 3M helps simplify cable routing for 10 GbE aggregation and 40 GbE top-of-rack applications while allowing optimization of the limited QSFP+ Cable to CX4 uplinks found on today’s network switches,” said Jeff Bullion, marketing manager, System and Components Business, 3M Electronic Solutions Division. “It provides a true plug-and-play, low-cost, low-power and low-latency alternative to the pluggable modules and patch cords commonly used today.”AUSTIN, Texas--(BUSINESS WIRE)-- A fiber fanout cable assembly supporting the interoperability of 40 Gigabit Ethernet (40 GbE) switch ports and 10 GbE server ports is now available from the 3M Electronic Solutions Division. The first-of-its-kind, 3M Active Optical Cable (AOC) Assembly for QSFP+ Cable Applications incorporates industry-leading VCSEL and 3M light-engine technologies to deliver exceptional cost and performance value for data centers and high-performance computing (HPC) clusters.

Wednesday, August 28, 2013

shield cables and a ground for the entire cable as well

Yesterday we did a cable pull. As an instrumentation worker this is probably as bad and as dirty as it gets. Most cables we pull are 18 gauge single pair. That means there is one black wire, one white wire, and a shield or ground cable. This is enclosed in a grey armored jacket. I’ve been involved in lots of those cables being pulled – not because I’m an apprentice but because it’s part of the job. The cables we had to pull today were 2 – 18 gauge 24 pair cables.Performance cables So inside the Grey cable there are 24 white wires, 24 black wires, 24 shield cables, and a ground for the entire cable as well.On this month’s Cable Talk, we discuss which cable components are critical and what the effects are of temperature fluctuations on sub-standard cables. We demonstrate how cable design, insulation and cable jacket materials collectively determine how effective a cable is in a  fast changing environment.

More than 210,000 users have watched a YouTube video of our data center operations team cabling a row of server racks in San Jose. More than 95 percent of the ratings left on the video are positive, and more than 160 comments have been posted in response. To some, those numbers probably tecnologicamente seem unbelievable, but to anyone who has ever cabled a data center rack or dealt with a poorly cabled data center rack, the time-lapse video is enthralling, and it seems to have catalyzed a healthy debate: At least a dozen comments on the video question/criticize how we organize and secure the cables on each of our server racks. It’s high time we addressed this “zip ties v. hook & loop (Velcro?)” cable bundling controversy.

Plug the cable from the interface box into of your mac

The Wacom tablet comes with a small interface box with a DVI video output and a USB output. Plug the USB cable into a free USB port on the computer. There are two included video cables with the Wacom, a DVI-to-VGA cable and a DVI-to-DVI cable. If you have a DVI port on your PC, that’s the preferred connection. The DVI output will  provide better calibration, less flicker and tighter alignment of the pixels and screen output.There is a switch on the interface box that must be manually set to DVI or VGA. Make sure it is set correctly for the cable you are using.Plug the USB cable from the interface box into the USB port of your mac.There are two included video SFP Plus cable with the Wacom, a DVI-to-VGA cable and a DVI-to-DVI cable. On a mac with a mini-display port, you will need a converter cable. The mac supports converting its minidisplay port to either VGA or DVI, but DVI works better. The DVI output will  provide better calibration, less flicker and tighter alignment of the pixels and screen output. There is a switch on the interface box that must be manually set to DVI or VGA. Make sure it is set correctly for the cable you are using. See the PC section above for a photo of the switch.

Direct Attach Cables (DAC) are high performance integrated duplex data link for bi-directional communication. And a SFP+ Direct Attach cable, also known as Twinax cables, uses SFP+ MSA and copper "twinaxial" cable with SFP+ connectors on both sides, ODU gives provides 10 Gigabit Ethernet connectivity between devices with SFP+ interfaces. SFP+ Direct Attach Copper Cable is expected to be the optimum solution for 10G Ethernet reaches up to 10 m.1.10GBASE-T commonly used for 10MB, 100MB and 1GB network connections, while SFP+ Direct Attach Cable only for 10Gigabit Ethernet Network. And 10GBASE-T also support much longer distances than SFP+ Direct Attach Copper Cable.

Sunday, August 25, 2013

switch on one end QSFP 4SFP10G CU1M direct attach breakout cables

The QSFP+ transceiver module connects the electrical circuitry of the system with either a copper or an optical external network.The transceiver is used primarily in short reach applications in switches, routers, and data center equipment where it provides higher density than SFP+ modules.Reliable source of discounted Cisco compatible QSFP 4SFP10G CU1M for $99.00 transceivers.The Cisco Nexus 3064 supports a wide variety of 1, 10, and 40 Gigabit Ethernet connectivity options. 1 and 10 Gigabit Ethernet connectivity is achieved using SFP+ transceivers in the first 48 ports, and 40 Gigabit Ethernet connectivity is achieved by using QSFP+ transceivers in the last 4 ports.Ethernet network QSFP 4SFP10G CU1M architecture has excelled well beyond industry expectations. However, network performance will undoubtedly suffer.

Thursday, August 22, 2013

Racks have two External MiniSAS Cable ports for up to an unsurpassed

OWC NewsFeed Other World Computing announced today its new External MiniSAS Cable storage solution for small businesses and enterprises utilizing mission critical and creative applications. Built upon the proven mini-SAS interface for speeds up to 24Gb/s using just a single cable connection, the Jupiter family of racks, towers, and hubs combine the highest levels of data sharing performance with the simplicity of direct attached storage (DAS) at up to 5x lower cost of fibre channel infrastructures. The Jupiter mini-SAS will be available by the end of March in a variety of configurations with 8TB Enterprise solution pricing starting at. During the Consumer Electronics Show (CES), which begins tomorrow in Las Vegas, Nevada, will demonstrate the high performance of the Jupiter mini-SAS in its booth #5231 in the LVCC North Hall.OWC Jupiter is the ideal scalable storage solution for small businesses and enterprises utilizing mission critical and creative applications. Jupiter JBOD/Expander Racks have two External MiniSAS Cable Online Store ports for up to an unsurpassed 48Gb/s data rate. Jupiter racks also offer truly massive storage support for up to sixteen 3.5″ drive bays, and when utilizing Jupiter switches, systems can be built to accommodate up to 3600TB.

Other World Computing announced today the first phase of its release of External MiniSAS Cable, with Jupiter JBOD/Expander Racks, PCIe HBA Cards and Enterprise Switches available for immediate ordering. Built upon the proven mini-SAS interface for speeds up to 48Gb/s, Jupiter combines the highest levels of data sharing performance SAS cables - HP: 407339-B21 with the simplicity of direct attached storage (DAS) at a fraction of the cost of fibre channel infrastructures. Expansion of the Jupiter line will continue with the release of Jupiter towers, workgroup switches and RAID subsystems in Q1 2013. OWC will demonstrate the high performance of External MiniSAS Cable at booth, LVCC North Hall, during the Consumer Electronics Show (CES), which begins Tuesday in Las Vegas, Nevada.


Wednesday, August 21, 2013

features an External MiniSAS SFF-8088 connector

 This 4x Mini-SAS cable features universal keyed 26-pin SFF-8088 pull to release connectors. The lanyard disconnect pull-to-release connector is compatible with all 40gb MiniSAS SFF-8088 ports. Thinner and more flexible than competing SAS products, our cables offer convenient routing options and improved airflow for your datacenter This allows the user to mix more expensive, lower-capacity SAS drives for applications that require faster data access and higher reliability, with lower-cost, higher-capacity SATA drives for applications with lower access speed requirements. Monoprice carries a full line of quality MiniSAS SFF-8088 with connectors for every possible application, both internal and external.MiniSAS SFF-8088 is a computer bus used to move data to and from computer storage devices such as hard drives and tape drives. SAS depends on a point-to-point serial protocol that replaces the parallel SCSI bus technology that first appeared in the mid 1980s in data centers and workstations, and it uses the standard SCSI command set. The T10 technical committee of the International Committee for Information Technology Standards (INCITS) develops and maintains the SAS protocol; the SCSI Trade Association (SCSITA) promotes the technology.

Tuesday, August 20, 2013

brand QSFP Active Copper Cable at Cables traditional optical

brand QSFP Active Copper Cable at Cables on Demand — High volume discounts available.AOC’s offer customers the flexibility of traditional optical modules by interfacing to systems via a standard QSFP Active Copper Cable  2M, PASSIVE, QDR, SFF-8436 connector. The cable is electrically compliant with the SFP+ interface supporting InfiniBand, Ethernet, Fibre Channel and other applications.  This “Fibre-to-the-Chip” technology enables Siemon’s Moray active optical cabling to break the cost barriers while decreasing the number of components in the AOC and improving its reliability when compared with existing vertical-cavity surface-emitting laser (VCSEL) and multi-mode fibre solutions.  Unlike traditional optics that utilise VCSELs and multi-mode fibre for short connections, Moray’s single chip transceivers support any distance from one metre to 4,000 metres for inter- and intra-building applications.Loopbacks feature a compact housing compatible with module spacing and loop optical transmit ports to receive ports for testing, burn-in and field troubleshooting.QSFP Active Copper Cable Description: The QSFP+ cable assemblies are high performance, cost effective I/O solutions for LAN,HPC and SAN... The QSFP Active Copper Cable includes the Digital Diagnostic Monitoring Interface (DDMI).Siemon, the network infrastructure specialist, today introduced its new line of four lane QSFP Active Copper Cable cabling assemblies,Mellanox Passive Copper Cable designed to support interconnect applications such as high-performance computing (HPC), enterprise networking and network storage systems.  These high-speed interconnects are a part of Siemon’s Moray? Active Optical Cabling (AOC) product family and expand Siemon’s extensive portfolio of copper and fibre data centre cabling solutions.

Monday, August 19, 2013

computer functions and different SDH SFP types of technology

The Signamax 065-73FXSM80MG is a Small Form-factor Pluggable (SFP) multimode fiber module that supports Fast Ethernet, SONET OC-3, or SDH SFP 1310NM 2KM | GLC-FE-100FX  over singlemode fiber cable at distances up to 80 kilometers. It adheres to the IEEE 802.3u standard for Fast Ethernet over singlemode fiber at 1550 nm, and is a cost-effective method of providing changeable Fast Ethernet singlemode interfaces to switches and media converters designed for these applications that are equipped with a standard 100Base SFP slot. The Integra Networks industry-standard Small Form-Factor Pluggable Interface Converters (SFP) for packet-over SDH SFP, optical networking and ATM applications (Figure 1) are hot-swappable optical interfaces that plug into a variety of OEM manufacturers’ router interfaces.SFP transceiver is a compact fiber optic transceivers for optical communication telecommunications and data communications applications.It is a popular industry format supported by several fiber optic component vendors.Ingellen SFP transceiver designed to support Fibre Channel, Gigabit Ethernet, SDH SFP, optical monitoring channel OSC SFP., And other communications standards.

Ethernet converter is the Ethernet cables at the end of another network to allow multiple system accurate corresponding with different wire. This is also be used in similar settings once there are several computer functions and different SDH SFP types of technology.SONET - Eoptolink On the side, the lines of fiber optic can defy the interference from whichever kind of electronic device, mobile phones and wireless complex not like with the conventional Ethernet which normally, loses the signal after being exposed to such apparatus. In this case, it is better to provide fast Ethernet optical fiber and the superior signal.

Sunday, August 18, 2013

SFP BIDI Transceiver is a high performance cost effective


SFP BiDirectional (BiDi) optical transceivers utilize innovative wavelength division and packaging technology to transmit and receive optical signals through only one single fiber (single mode or multimode). SFP BIDI Transceiver is a high performance, cost effective module, which is compliant with LC/SC Optics interface with built in WDM for Bi-Directional serial optical data communication applications and Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The deployment of BiDi optical transceivers instantly doubles the bandwidth capacity of the existing optical fiber infrastructure. Our SFP BiDi  TX1310/RX1490NM 2KM optical transceivers also comply with Small Form Pluggable (SFP) Multi-Source Agreement (MSA). SC connector interface is also available upon special request.

Fiberstore supply the SFP BiDirectional including about BiDi sfp 20km,BiDi sfp 40km,SFP BiDi 80km on three Transfer Distance.It s compatbile with all brands including Cisco, HP, Huawei, Nortel, Extreme, Juniper, etc. Please specify the brand name of your system when you make the order. Without your specify, we will make Cisco Compatible as default compatible brand.BERT generated a 1G Ethernet Signal, the BIDI transceiver coupled it to multimode link OpixCom’s SFP BiDirectional with 1310nm and carried it to the other SFP BiDi . Then, the incoming signal inside the flexBox loop was sent to the transmitter of the same BIDI and in turn, was sent through the same fibres with 1550nm back to BERT.  This allowed us to analyse if the sent Bit Pattern corresponded to that of the received one.  This worked well up to a distance of 320m.  Over larger distances we ended up with bit failure rates.

Friday, August 16, 2013

This is a male Internal Mini SAS Cable plug


Final test results concluded that no bit errors were detected, which indicate that Internal Mini SAS Cable perform without dropped data for system builders using the 6Gb/s SAS technology. Prior to the event, internal S-parameter and near-end-crosstalk tests were conducted on the cable assemblies to meet the requirements for 6Gb/s SAS specifications.According to a STA press release,http://www.fiberyes.com/minisas the system build was extremely successful and showed the interoperability, robustness and versatility of the SAS ecosystem.

Harry Mason, President of STA and Director of Industry Marketing, LSI Corporation, said,"Active cabling is an extremely important aspect of SAS evolution and we greatly appreciate Tyco Electronics' involvement in moving this capability forward. They have been an active participant in each of the Plugfests, and their efforts played a large role in the success of this event."This 1 meter long cable uses 28 AWG wires and is intended for internal use. It has a single 36-pin SFF-8087 90-degree male Internal Mini SAS Cable plug (with locking latch) on one end and has four 7-pin SATA female plugs (with locking latches), plus a single 8-pin female power plug, on the other, allowing you to connect four SATA drives to an SAS controller. This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA end.

Thursday, August 15, 2013

Switch easily connects to one Mini HDMI port own today


You don’t need to buy an Ouya or a GameStick system, however, because an inexpensive Android Mini HDMI can serve as a gaming console. A dual-core Android stick like the Android Mini HDMI SINGLE CABLE TRANSMITTER/ADAPTER RK3066 has more than enough oomph to play demanding games, while a new generation of quad-core devices promises even better performance. Just be sure to pair your stick with a wireless joystick like the SteelSeries Free Wireless Game Controller and choose controller-friendly games. The PNY 5-Port Switch offers a simple solution to expand the amount of HDMI ports available on your HDTV, taking the hassle out of switching Mini HDMI cables back and forth from one device to another. The switch provides seamless transition between multiple HDMI-enabled devices, for instant access to view the content you desire – from your favorite show on cable, movies on your Blu-ray, websites on your PC, and even pictures from your smartphone.  Consumers can upgrade their HDMI capabilities without having to upgrade their

Most Android Mini HDMI are also capable of running Ubuntu or other desktop versions of Linux. With a windowed interface that makes multitasking easy and access to thousands of productivity apps, from video editors to office suites, you can use your stick PC for serious productivity. A Mini HDMI connector was introduced in the HDMI 1.3 specification. As it's name suggests it Tripp Lite P570-006 6 feet]  is much smaller than the Standard Type A HDMI connector, although it still has 19 pins. The Mini HDMI, also known as the Type C connector, was developed for smaller, portable devices where standard HDMI ports would be too large. It is now commonly being found on the new generation of HD Camcorders and notebooks

Wednesday, August 14, 2013

There are ribbon Compatible Fiber Optic Cable type multi


Compatible Fiber Optic Cable and Singlemode duplex cable alike are used for two-way data transfers. Larger workstations, switches, servers, and major networking hardware tends to require duplex fiber optic cable. Duplex cables can be more expensive than Simplex cables, and are compatible with any HDMI extender.Both multi fiber cables and simplex cables are with a single outer jacket, but simplex only has one thread fiber glass inside the core,http://www.fiberyes.com/ while multi fiber has many threads of fiber optic glass inside the core. For example, an Compatible Fiber Optic Cable. There are ribbon type and bundle type multi fiber cables.

Compatible Fiber Optic Cables and multi-mode fiber cables are similar in many ways, with the main difference being that the glass center of single-mode cables is significantly smaller, at about 10 microns in diameter. The smaller size is what allows these cables to transmit data up to 40 miles with a bandwidth of 1Gbs.Only need a Compatible Fiber Optic Cable if data will be traveling in one direction, such as with a security camera or truck weigh station. And if your data will be traveling a long distance – for instance between buildings or from one station to another – then you’re better off with a single-mode fiber cable.

Tuesday, August 13, 2013

Ltd has launched the MiniSAS SFF-8088 high performance networks


SIIG's 2M External MiniSAS SFF-8088 to SFF-8088 Cable is designed to connect external hard disk drive to the external SAS port of the controller card from your computer system. This high quality cable is 2 meters in length, supports data transfer rate of up to 6Gb/s and features SFF-8088 (26-pin Mini-SAS) to SFF-8088 (26-pin Mini-SAS) connectors.MiniSAS SFF-8088 is a computer bus used to move data to and from computer storage devices such as hard drives and tape drives. SAS depends on a point-to-point serial protocol that replaces the parallel SCSI bus technology that first appeared in the mid 1980s in data centers and workstations, and it uses the standard SCSI command set. The T10 technical committee of the International Committee for Information Technology Standards (INCITS) develops and maintains the SAS protocol; the SCSI Trade Association (SCSITA) promotes the technology.The FiberStore MiniSAS SFF-8088 to SFFP-8088 cables are advertised as ideal for dependable, reliable, and cost effective 6 Gb/s storage configurations for networks, servers, workstations and desktops.The SFF-8088 cables are currently available in 6 Gbs external or 3 Gbs internal and far-out assembly types. SFF-8088 with power are also in stock. Custom Mini-SAS cables are available in various lengths and other options

straightforward solution to convert the SFF-8088 to SFF-8087 port to external


MX-PRO0H2 Mini SAS Adapter, Host Compliant with SFF-8088 to SFF-8087 Specifications Supports External SFF-8088 26-pin Connector Supports Internal Host SFF-8087 36-pin Connector Supports Standard and Low Profile PCI/PCe Form Factors Supports up to 4-lane Mini SAS Channels Supports up to 3Gb/s Mini SAS Data Transfer Rate Supports SFF-8087 to SATA Host Octopus Cables Supports SFF-8087 to SFF-8087 Mini SAS Host Cables Supports Standard SFF-8088 to SFF-8088 4-lane External Cables Idea for SAS and SATA RAID Host Cards INTRODUCTION The MX-PRO0H(with low profile bracket) were specially designed to adapt the internal host SFF-8087 to a SFF-8088 external connector. It provides a straightforward solution to convert the SFF-8088 to SFF-8087 port to external. Serial Attached SCSI (SAS) is a data transfer technology designed to move data to and from computer storage devices such as hard drives and tape drives. It is a point-to-point serial protocol that replaces the parallel SCSI bus technology that first appeared in the mid 1980s in corporate data centers, and uses the standard SCSI command set.

Monday, August 12, 2013

Also there are other Compatibale brands provides Cisco SFP 1.25G

The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver.The standard serial ID information compatible with Cisco SFP 1.25G describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROMprotocol. For further information, please refer to SFP Multi-Source Agreement (MSA).The SFP transceivers are compatible with RoHS.Within the development of telecommunication industry, the craze of fiber optic products is rising everyday. One, who wants to be a part of a competitive optical fiber industry, it ought to search the dependable source of supplying fibre optics products manually or via internet. Ingellen is a well-known center of optical fiber products for manufacturing and exporting the products, its good feedback from all over the world. Ingellen provides a fully line of fiber optic transceivers, and today I would like to introduce you something about the hot selling Cisco SFP 1.25G(small form-factor pluggable) transceiver in the following list.The transimpedance amplifier IC has internal AGC for wide dynamic range. The postamplifier is AC coupled to preamplifier through a capacitor and a low pass filter. It can be enough to pass the signal from 100Mb/s to Cisco SFP 1.25G without significant sensitivity. A Signal Detect status output flag is also provided.

Friday, August 9, 2013

SFF-8088 cable is constructed of high quality materials


The only problem I had with these servers is with the v1.46 firmware that shipped on the Areca's. There was high latency the first time a file is read or written, about 2 or 3 seconds. But when I upgraded the firmware to v1.47, this problem went away. Now all servers are happily serving more than 20 TB of data each, with only 1 SFF-8088 cable failure out of 64 SFF-8088 cable (infant mortality?).Can you describe in more detail your Areca 1680ix setup and what exactly you observed with the WD2002FYPS drives?Tripp Lite’s S524-01M External SAS cable features SFF-8088 cable connectors with heavy- duty metal backshells. This 4-channel Infiniband cable is constructed with high-performance Amphenol Spectra-Strip SKEWCLEAR cable which features individually shielded parallel pairs double EMI/RFI shielding and 3.0 Gigabytes per second performance. Tripp Lite Lifetime warranty.Primary InformationStorage Cable Type Serial attached SCSI (SAS) external cable Cable Technology http://www.fiberyes.com/external-sff-8088-y-cable Double shielded Dimensions&MiscellaneousLength 3.281 feet Color Black Storage CableLeft Connector Before the popularity of SAS Expanders, people had to use SFF-8088 cable adapters to convert unused internal ports into external ports. This is still common for SATA controllers, or SAS controllers that are not being used with a SAS Expander setup.

Thursday, August 8, 2013

The advent of QSFP Active Copper Cable interconnects

The QSFP Active Copper Cable assemblies are high performance, cost effective I/O solutions for 40G LAN, HPC and SAN applications. QSFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet , InfiniBand and Fibre Channel industry standard requirements for performance and reliability..Sopto unique quality passive water piping cable solutions provide power-efficient replacement for active power connection such as fiber optic cables. Optimizing systems to operate with Mellanox’s QSFP Active Copper Cable significantly reduce power consumption. Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.QSFP Active Copper Cable are copper cables for data transmission that use a silicon chip (semiconductor) to boost the performance of the cable. Without a chip, a cable is considered a 'passive' cable. Passive cables are liable to degrade the data they carry, due to such "channel impairments" as attenuation, crosstalk and group velocity distortion. In active cables, one or several semiconductor chips are embedded in the cable to compensate for some or all of these impairments. This active boosting allows cables to be more compact, thinner, longer and transmit data faster than their passive equivalents.

Wednesday, August 7, 2013

In FiberStore OM1 Simplex Patch Cord that is used

Multi-mode fibers are described by their core and cladding diameters. Thus, OM1 Simplex Patch Cord um multi-mode fiber includes a core size 62.5 um along with a cladding diameter of 125 um. The transition between your core and cladding can be sharp, which is called a step-index profile, or perhaps a gradual transition, which is called a graded-index profile. The two types have different dispersion characteristics and therefore different effective propagation distance.Here I will mainly introduce the products of OM1 Simplex Patch Cord to you. OM1 62.5/125 fiber patch cord is a type of OM1 Patch Cable, with high return loss and low insertion loss, OM1 62.5/125 patch cable always apply in Fiber Optic Telecommunications and speed transmission systems. OM1 62.5/125um Multimode Patch Cables with FC, SC, LC, ST, MTRJ or MU connectors have been in huge stock and ready to ship. For example, FC to FC 62.5/125 Simplex Patch Cable is one. Those OM1 Simplex Patch Cord jumpers features good quality and therefore are perfect optically tested to make sure high end. FiberStore can customize fiber cords about length or connectors to satisfy your different requirements.

Tuesday, August 6, 2013

The QSFP Active Copper Cable Channel industr performance


QSFP Active Copper Cable adoption in data centers has been growing steadily. For example, as of 2010, half of SFP+ interconnect volume is in active cables (as opposed to passive copper cables and optical transceiver modules) The advent of QSFP Active Copper Cable interconnects for 40 Gigabit Ethernet and Infiniband is driving the widespread adoption of active cables in this form-factor as well.Fiberon’s QSFP Active Copper Cable assemblies are a low cost alternative for short reach 4X applications. They are designed to be fully compatible in form factor and optical/electrical connections according to the QSFP Active Copper Cable Source Agreement QSFP+ (Quad SFP+) connectors provide four channels of data in one pluggable interface. Each channel is capable of transferring data at 10Gbps and supports a total of aggregate 40Gbps as specified for QSFP Active Copper Cable. These interconnects have three times the density of SFP+ interconnects(MSA) and have been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference

Sunday, August 4, 2013

High Routability Internal Mini SAS Cable Assemblies meet

We specialize in hard-to-find high-speed data storage and networking connectivity products. For data centers, we offer a wide selection of varying lengths of SFP+ cables and QSFP+ cables--the newest technology that will take your network to the next level. For your storage array, you can find all of your SAS, Mini SAS HD and Internal Mini SAS Cable. From our online store, you'll find everything you need with us. Feel free to contact us if you have questions about our products or need cables made to your specifications.has tested these assemblies in folded configurations, and each fold impacts the at that location by approximately only 1 ohm, well within the tightest impedance specifications (and note that the impedance at each fold is not cumulative, but is only a variation at that point).Similarly, S-parameter performance metrics are not degraded, and the cable assemblies still passInternal Mini SAS Cable criteria, even with multiple folds.  Should your design require any folding, be sure to restrain the cable with the appropriate cable clamps to  prevent repeated flexure at the folds.

Friday, August 2, 2013

noteworthy but discrete benefit of using QSFP to SFP+


With four native QSFP to SFP+ connectors available on each splitter cable, 40 discrete Gigabit Ethernet connections can be eliminated from the mix. By electing to work with a splitter cable, the costs associated with potentially thousands of CAT6 patch cords and the power-hungry chipsets that drive them are alleviated entirely. High-density QSFP to SFP+ connections are far more efficient, offering an impressive 10-fold reduction in power consumption and heat dissipation by comparison.Genuine Amphenol Hybrid QSFP to SFP+ Passive Copper Splitter Cable Assemblies are available in a variety of popular lengths, including 1m, 3m, and 5m – perfect for short-run top-of-rack switching applications. Each QSFP to SFP+ Splitter Cable utilizes Amphenol’s latest generation of high-performance connectors with superb resistance to crosstalk. All of the connectors are fully enclosed within zinc die-cast backshells for superior EMI performance and minimal insertion loss.

Thursday, August 1, 2013

Even though audio is supported by the adapter and by Mini HDMI


In the past year or so we’ve seen many laptops and video cards that are coming equipped with mini DisplayPort connections but those laptops and video cards don’t come with adapters so you can actually make use of those ports. Today I’ve got a short review for you of a product that many of you might find very useful, it’s a 3-in-1 adapter that goes from mini DisplayPort output to DVI, Mini HDMI or stand DisplayPort video inputs. The product is just a small white box really, not much special or exciting about it but it is inexpensive and it does the job it needs to do.The only let down is the lack of audio support. Even though audio is supported by the adapter and by Mini HDMI DisplayPort specifications, it currently does not work. Hopefully in the future Apple will add audio support through a software update, but as of now there no way to know if that’s even an option.The adapter works well and I didn’t notice any artifacts or other video issues while playing HD content to the TV. The adapter fully supported  resolution, as stated in the features, when plugged into to my 46 Sharp Aquos. I was nervous that using Mini HDMI would cause overscan and not fit correctly in dot by dot mode; however, just as with the direct DVI connection port on the TV, the HDMI worked perfectly.

Wednesday, July 31, 2013

pushing the adoption of Compatible Fiber Optic Cable through



While the adoption of optic cables slowly moves along, Intel researchers are already creating new Thunderbolt tech based on silicon photonics, which has the ability to transfer data as much as five times faster than current Thunderbolt tech, and it's expected to reach the hands of consumers by Compatible Fiber Optic Cable will offer faster data transfer speeds, and will be able to provide data transfers over distances of tens of meters ...That's amazing, you mean I'll be able to locate my usb drive 10 metres away from my computer? Wow.The distances for fiber channel, 10 gigabit ethernet and freespace Compatible Fiber Optic Cable are just insane, as for the global Internet, it's unbelievable how these glass pipes reach around the planet.One of the promises of Intel's Thunderbolt technology was the possibility for fiber optic cables, offering greater cable lengths and setting the stage for faster connectivity once the standard matures. But Thunderbolt launched using only traditional copper wire cables, and there has been some dispute about just how soon Compatible Fiber Optic Cable will become available.

Tuesday, July 30, 2013

Cisco QSFP 4SFP10G CU1M Twinaxial splitter and others


 Twinaxial splitter 3064 E is a product that is popular today,and now I will show you a place where you can buy the Cisco QSFP 4SFP10G CU1M Twinaxial splitter 3064 E at good price, I know if the Cisco QSFP 4SFP10G CU1M Twinaxial splitter 3064 E iscurrently being sought through the search engines like google, bing,yahoo and othersThe Cisco QSFP 4SFP10G CU1M (Quad Small Form-Factor Pluggable Plus) modules offer customers a wide variety of high-density 40 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider transport applications.Cisco QSFP 4SFP10G CU1M direct-attach breakout cables are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. These breakout cables connect to a 40G QSFP+ port of a Cisco switch on one end and to four 10G SFP+ ports of a Cisco switch on the other end. Cisco currently offers passive cables in lengths of 1, 3 and 5 meters, and active cables in lengths of 7 and 10 meters.Shop at Amazon.co.uk for Cisco Compatible QSFP+ Direct Attach Copper Breakout Cable QSFP 4SFP10G CU1M.

Monday, July 29, 2013

MiniSAS 8088 controller cards come complete with an easy


There was the suggestion that the cost of Thunderbolt cables was in-line with other high-speed cables such as external MiniSAS 8088 (Serial Attached SCSI) and Infiniband, both of which have been available for years now. Now, I can understand the high cost of these cables, which are used by specialty, high-performance applications. But Thunderbolt?Sep 22, 2011 - I have a Vertex 3 and my OWC SSD is in the mail to me today and I'd like to have a solution MiniSAS 8088 for making full use of their speed.The MAXPower RAID MiniSAS 8088 card features two external mini-SAS ports that enable connecting and RAIDing multi-drive mini-SAS external enclosures or up to eight eSATA external enclosures via MiniSAS 8088. For Mac and PC users who want to connect and RAID both external enclosures as well as internal drives, the MAXPower RAID mini-SAS 6G-1e1i card features one external mini-SAS port and one internal mini-SAS port

Sunday, July 28, 2013

Fibre Channel and SFP+ Active DAC Assembly

SFP+ Active DAC will offer data center designers an interesting choice in the 2011 timeframe In the past two years an unprecedented innovation occurred.  Instead of connecting two SFP+ Active DAC interfaces together using optics, a direct way of connecting without optical interfaces was created, using cables with ends built to behave as SFP+ optical modules. That’s why SFP+ Active DAC is being adopt
Campus LANs are used to tie together multiple buildings, typically spanning longer distances.  In this case neither 10GBase-T nor SFP+ Active DAC is a good choice, and most network designers use fiber optics to provide long distance capability Buy Compatible from China factory, ship in 1 day, Return ... passive SFP+ Twinax cables in lengths of 0.5 to 10 meters and active  Now On Sale [20% OFF] -- Active SFP+ Cables by Amphenol provide an ideal low-cost alternative to multimode SFP+ optical modules. Each Amphenol  Assembly emulates a pair of optical modules with complete system transparency, thus allowing you to cut your power budget in half and your cable budget by far more.

Friday, July 26, 2013

which include SFP 1.25Gb/s cost effective


SFP 1.25Gb/s can be regarded as the upgrade version GBIC. Unlike GBIC with SC fiber optic interfaces, cisco SFP is with LC interface. Moreover, its main body size of SFP is only about half of GBIC, which makes SFP space saving. Cisco pluggable transceivers offer a convenient and cost effective solution for the adoption in data centers, campuses, metropolitan area access and ring networks, and storage area networks. Users can replace a single SFP module during the process instead of replace the whole board with many modules on it. Cisco Transceiver Modules support Ethernet, Sonet/SDH and Fibre Channel applications across all Cisco switching and routing platforms. The Cisco SFP transceiver is defined by a multi source agreement between some manufacturers in the industry. Cisco SFP fiber optic transceivers, which include SFP 1.25Gb/s,  Cisco DWDM SFP, Cisco Copper SFP and Cisco Bidi SFP. Cisco GLC T SFP transceiver is a hot pluggable module use RJ45 interface, it is compliant to IEEE 802.3 and its dimension is is with plug in module type Mini-GBIC. GLC T is 1000Base SFP fiber optic transceiver module via Category 5 copper line,

Thursday, July 25, 2013

which makes SFP 1.25Gb/s as the upgrade

The SFP 1.25Gb/s transceiver modules are hot-pluggable I/O devices that plug into module sockets. The transceiver connects the electrical circuitry of the module with the optical or copper network. GBIC transceiver, short name for the Gigabit Interface Converter, is a media conversion device between Gigabit Ethernet and fiber optic networks. Via the GBIC transceiver, Gigabit network equipment can directly connect to copper wires, single mode fiber ports or multimode fiber ports. SFP 1.25Gb/s can be regarded as the upgrade version GBIC. Unlike GBIC with SC fiber optic interfaces, cisco SFP is with LC interface. Moreover, its main body size of SFP is only about half of GBIC, which makes SFP space saving Sopto’s SFP 1.25Gb/s support both Gigabit Ethernet and 1x Fiber Channel applications and comply with Gigabit Ethernet requirements. They provide communications over SM and MM fiber and use an connector. Transmission occurs over VCSEL, FP, Distributed Feedback (DFB), or CWDM laser sources, and with PIN or APD receiver options. This product family also has Internal Digital Diagnostic options.

Wednesday, July 24, 2013

between an QSFP to XFP Cable optics module


Common direct attach cables include SFP cables, SFP+ cables, QSFP to XFP Cable, QSFP+ cables, MIni SAS cables, CX4 cables. These direct attach cables can meet the ever growing need to cost-effectively deliver more bandwidth, and they can be customized in different length to meet your requirement
The nitty gritty details between an XFP optics module and an SFP+ optics module are fairly straight forward.  For QSFP to XFP Cable, on the transmit side of things, the optics module standard provided additional signal conditioning before  For SFP, there is no additional signal conditioning provided in the module specification.  Essentially, with the interface to SFP modules (called the SFI interface), the signaling requirements are very much more strict then the signaling required from XFI interfaces to the QSFP to XFP Cable modules.On the receive side, there is a similar need in XFP modules for signal retiming that is no longer required in SFP+ modules.

Tuesday, July 23, 2013

Cisco QSFP to CX4 can be as a fiber optic solutions

Cisco QSFP to CX4 use cutting edge technology to provide an excellent hybrid cable solution for CX4/InfiniBand and QSFP rated switches, network adapters, and storage arrays. These cables have a QSFP connector on one end and a CX4 Connector on the opposite end. Each Cisco QSFP to CX4 permits auto-negotiation between the two connected devices for optimal network throughput. Reaching data rates of up 5Gpbs per channel. Compatible with 4x Infiniband SDR/DDR and 10 GbE applications.This cable is available at lengths from 0.5m to 15m.No matter if you need to interface to Infiniband, SC4 or SAS, Cables Plus has you covered. Cisco QSFP to CX4 CABLE found in applications connecting SFP switch to storage devices or computing clusters.Ltd also offers SFP+ Passive Cable, Fibre optic Active, Cisco QSFP to CX4 and Minisas Cable etc. high speed cable, SFP+, XFP, XENPAK and X2 etc. 10G transceivers and various 1000Base,100Base,OC3,OC12 and OC48 optical modules.

Monday, July 22, 2013

gritty details between an QSFP to XFP Cable optics module

QSFP to XFP Cable is suitable for very short distances and offer data rates up to 40Gb/s supporting Fiber Channel, Ethernet, SDH/SONET and Infiniband standards to maximize performance. It provides a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. FIberStore provide QSFP+ cables including QSFP+ to 4 SFP+ Breakout Cable, QSFP to CX4 Cable, QSFP to XFP Cable. These cables are available in lengths up to 20m, and we also offer custom cable length to meet your requirement The real reason that SFP+ can be so much more compact than an older QSFP to XFP Cable module is due to this difference in internal circuitry. This is why SFP+ modules are smaller, and generally consume 0.5-1.0W less than respective XFP modules.

Sunday, July 21, 2013

less popular in QSFP to CX4 the data center

At a distance of about 100m range, the only only QSFP to CX4 can use multimode fiber supports SR, or within the 10km using duplex single-mode fiber optic QSFP switches support SR–is using the same port. ColorChip and other companies such as Sumitomo QSFP module; Oclaro (by Opnext mergers and acquisitions) QSFP (also known as Quad Small Form-Factor Pluggable) copper cable assemblies are a high-performance computing connectivity solutions supporting InfiniBand QDR, DDR,SDR, CX4, Fibre Channel and SAS applications.QSFP+ to CX4 Active Optical cables feature a QSFP+ Zinc Die Cast SFF-8436 connector on one end, and an External CX4 SFF-8470 with a pull latch connector on the other end. This cable is built using Optical Fiber for Active ports.SFPDA is similar in concept QSFP to CX4 but provides a bit more flexibility. Normally, you may have a switch or NIC that is designed to be able to support the addition of SFP based optics modules for a 10GbE fiber connection.There are also what referred to as ‘active optical' cables are for QSFP to CX4, which actually have an optics module in the termination of the cable,QSFP to CX4 connectors provide four channels of data in one pluggable interface. Each channel is capable of transferring data at 10Gb/s and supports a total of 40Gb/s as specified for QSFP+.

Friday, July 19, 2013

pluggable CX4 to QSFP Cables solution is designed

Our CX4 cables provide the fastest transfer rates to offer scalable and cost effective solution for testing 10G and Infiniband ports. These assemblies enable hardware OEMs and data center operators to achieve higher port density and configurability at a low cost while reducing the power requirement. However, what has been lacking until now has been the transmission distance. Currently, using the multimode QSFPs+ available, distances of up to 150m can be achieved on OM4 fiber.optical loopback host connector, connectors and cages stacked style integration.CX4 to QSFP Cables assembly is designed to provide a stacked connector configuration in the demand of very high density. The system will support 10 G Ethernet, Fibre Channel, InfiniBand , SAS and standards with different data rate options.A robust 4.50 mm bullet cable to ensure the integrity and CX4 to QSFP Cables routing cables required for installation is chassis is dispersed over 25 meters. Loopbacks features compact housing compatible with module spacing and loop optical transmit ports to accept port test, aging, and on-site troubleshooting.

Thursday, July 18, 2013

FiberStore supply hp XFP to SFP+ Active and active


The SFP+ module can be a variant of the SFP optical transceiver. The hp XFP to SFP+ Active module form factor is 30% smaller, uses less power, requires fewer components, and it is less than the 10-Gigabit small form-factor pluggable module (XFP) form factor, that was already smaller and used less power compared to XAUI-based XENPAK and X2 form factors.The SFP+ form factor significantly simplifies the functionality of the 10G optical module by moving such functions as clock and data recovery (CDR), electronic dispersion compensation (EDC), 10G SERDES, and signal conditioning that traditionally resided in the XAUI-based modules into 10GbE PHY devices and line cards. Because of this, the modules are smaller, consume less power, and allow increased port density while being less than hp XFP to SFP+ Active. Some products on the market now provide 48 ports or maybe more inside a rack.give you the SFP+ transceivers are also not merely efficient, but cost effective, using a power consumption of less than 1W.

Wednesday, July 17, 2013

You will run a copper CX4 to QSFP from

These HCAs are not used directly by the OS, instead, host-side drivers work together with the Xsigo I/O Director to ensure that the appropriate vNIC and vHBA devices are available to the OS.  Of critical importance is that thes vNIC and vHBA devices work exactly as physical NICs and HBAs and the OS is none the wiser. Infiniband as you will ever see or need to configure in the solution. The rest is normal Ethernet and FC. That means you have to go to Optical quicker.  The Cisco list price of an SFP+ Optical tranceiver is $1795 (that is for 1 end…you need 2 to make a cable).  CX-4 optical is <$1000 list for teh entire active optical cable.  QDR (40Gb ) IB is already out and uses CX4 to QSFP…….and so will 40 GbE in a few years….so IB is actually paving the way for 40GbE.  It is no surprise that Mellanox was the 1st to announce a 40GbE NIC….since it is really the same ASIC as their 40Gb IB adapter…..same CX4 to QSFP theory, you can load an IB driver or an Ethernet driver, or an RDMAover Ethernet driver and have channel IO and/or Ethernet ….now that is true convergence. I would be happy to answer any other questions  discount offers once on its slate of new product launches in 2012 to celebrate. Just enter coupon code upon checkout to and get 12% off your first online order.

Tuesday, July 16, 2013

QSFP Passive Cable are available in standard program


QSFP Passive Cable (Quad Small Form-factor Pluggable Plus) is a transceiver interfaces a network device motherboard (for a switch, router, media converter or similar device) to a fiber optic cable, widely used for data communications applications. It is a industry format jointly developed and supported by many network component vendors. QSFP is also the IEEE standard connector for the emerging 40GbE standard. Like SFP+, QSFP Passive Cable and optical cabling solutions

QSFP Passive Cable supports link lengths of 100m and 150m respectively on laser-optimized OM3 and OM4 multimode fiber cables. It primarily enables high-bandwidth 40G optical links over ribbon fiber cables terminated with multi-fiber connectors, and could also be used along with ribbon to duplex fiber breakout cables for connectivity to four 10GBASE-SR optical interfaces.
Fiberstore offers the best QSFP modules. All these QSFP Passive Cable are Cisco, Juniper, IBM and HP compatible! The QSFP transceivers are great a solution for multi-lane data communication and interconnect applications. In addition to 40Gbps Ethernet interconnects, it can be used in datacom/telecom switch, and router connections, as well as data aggregation and backplane applications. Also you can have a wide selection of other transceivers at Fiberstore.com, including xfp transceivers, CFP modules, sfp transceivers and so on.

Friday, July 12, 2013

Intel Fiber CX4 to QSFP Cables data storage

On Order CX4 to QSFP Cables from 3M? Interconnect Solutions Now In-Stock! Available in lengths ranging from , 3M's Active Optical Cables offer the best power consumption in their class and help bridge the gap between gear with SFF-8436 ports (QSFP and QSFP+).and SFF-8470 ports (CX4/DDR InfiniBand). You may view our entire selection of CX4 to QSFP Cables Hybrid Active Optical Cables below. speed applications including switched fabric I/O, switches, routers, data storage arrays,integrated 10.0 Gbps optical transceivers (40G+ aggregate) each; ensuring compatibility with the latest QSFP and QSFP+ enabled hardware in datacenters and HPC clusters. Interconnect Products and are ideal for bandwidth-intense applications such as QDR InfiniBand, 40-Gigabit Ethernet, Fibre Channel, and SA QSFP+ connectors add an extended EMI rail to meet 40 Gigabit Ethernet specifications and are reverse compatible with QSFP ports.copper cable technology,CX4 to QSFP Cables have quickly become the interface of choice for switches, routers, and high performance computer clusters.Please click here to view our entire selection of CX4-CX4 Active Optical Cables

Thursday, July 11, 2013

The hp XFP to SFP+ Active is a lot more compact in proportions

Many companies, such as Cisco, Finisar, and Sumitomo, have released SFP+ transceivers. SFP+ ensure the 10Gbps data transmission and the most densely installation capability as well as the lowest cost, currently it is well acknowledged as the ultimate choice for the 10Gbps fiber optic transceivers. Among them, hp XFP to SFP+ Active is the mainstream market. Cisco 10Gbase SFP+ transceivers are used for high speed 10Gigabit Ethernet, linking the equipment to fiber optic networks. Cisco SFP+ products include active SFP+ cables and hp XFP to SFP+ Active. There is also copper transceiver available from Cisco.The Cisco 10GBASE hp XFP to SFP+ Active modules offer customers a wide variety of 10 Gigabit Ethernet connectivity selections for data center, enterprise wiring closet, and service provider transport applications.SFP+ module can be a next-generation transceiver module specified by the ANSI T11 Group for 8.5 Gbps and 10Gbps Fiber Channel and Ethernet applications.

Wednesday, July 10, 2013

hybrid QSFP+ Passive Copper are compliant with


I have two Dell MXL blades [FTOS 8.3.16.2] in a M1000e chassis with a MXL blade in slot A1 and slot A2 as shown below. The ‘fortyGigE 0/33′ port on each switch is connected to the other via a 40 GbE QSFP+ Passive Copper. Dell MXL blade switches support both ring and daisy chain topologies. In this example, I simply daisy chain two MXL blades to create one logical switch that can be managed as one unit. In a typical scenario, VLT can then be employed from two ToR switches down to the MXL stack using the two free fixed 40GbE ports; however, I do not demonstrate this VLT configuration here. To see VLT configuration see my prior blog
Movement to QSFP and XFP show density in the datacenter on the rise! 10/100 Gbps are making inroads, particularly within the rack and across the datacenter. Long range 40Gbps is 4 trunked 10 Ge links, either MO4 fiber or extended range out to 3000 Meters - that’s 1.86 miles. QSFP+ Passive Copper allows 2x 10Ge fiber connections (fiber count of 4) connections in a single plug switch-side with a split tail host-side. That is 1 cable for 2x 10Ge drops from host to switch.  That just cut a typical cabling load in the rack in 1/2.  Choose QSFP+ Passive Copper for even more affordable cabling! Did someone say 10Gbps over copper? Boy, the photons must be getting scared. For another reference

Tuesday, July 9, 2013

distances and offer Cisco XFP passive Cable

Fibre Channel and telecom switches and standard PCI (peripheral component interconnect) based server and storage connections,the place where a half size as  optical transceiver is desired. X2 Transceiver is physically smaller than but maintains the mature electrical specification The Cisco XFP passive Cable is to use integrated digital diagnostic functions. The 10GBase-LR transceivers operate in a 1310nm optical wavelength xfp is hot swappable fiber optic transceiver employed for 10G networks like 10 Gigabit Ethernet, SDH, SONET, XFP LR support data rate from 9.95Gbps to 11.1Gbps, max working distance of the XFP LR fiber transceiver is Compatible 10G X2 we also supply, are Cisco 10G Base X2 module,  etc.We not merely have cisco X2,and involve some other cisco transceiver Ingellen Cisco XFP passive Cable includes digital diagnostics that provide management that were added to the standard.

Monday, July 8, 2013

ESX thought provide 10GB HBA Ethernet

You can see a screenshot of the error here. arrays in the lab, and I’ll be using the equipment to help generate reference architectures and standard configurations for the ePlus virtualization team been following my updates on Twitter, you know that I’m in the process of installing 10GB HBA Ethernet and Fibre I had to install the RPM directly and include the --force parameter because ESX thought the version that was already installed was newer than the beta driver omit the --nosigcheck parameter because esxupdate then failed with error 20 (VibSigMissing). That, unfortunately, worked only for the Ethernet but the ESX console showed an error about missing signatures. You can see a screenshot of the error here.Typical FC 10GB HBA can only reach 160,000 IOPS or so, a rate the iSCSI initiator could handle with large blocks and low CPU utilization.allow your physical network with clients at 1Gb to benefit of your troughput from your storage-VM. With a second 10Gb pNIC, which is just attached As a performance upgrade I can then use a server with lots of RAM, stick on Windows Storage Server 2008 r2 and a couple of good controllers, plus a couple of 10GB HBA to act as a head unit, and attach the JBOD to it I've just got a 3 node cluster running on the SAN so it's unlikely I'm going to feel much of a performance gain from 10GB HBA and the rest.

Sunday, July 7, 2013

Return Loss QSFP+ Passive Copper form factor interface


Siemon, a leading global manufacturer of IT network cabling and infrastructure systems, announces the release of its 40 Gb/s 40+Gb/s QSFP+ passive copper cabling products.  These shielded 4-lane copper cable assemblies were developed as a cost-effective, low-power option for high-speed data centre interconnects up to 10 metres, ideal for applications such as high-performance computing (HPC), enterprise networking, video networking and network storage systems.

The QSFP+ Passive Copper form factor interface can replace up to three standard SFP+ connections, providing greater port density and reduced system cost. Advanced design and manufacturing processes, such as precision wire stripping and a unique automated termination process result in optimised cross talk and Return Loss. The same automated processes result in Siemon QSFP+ Passive Copper consistent and industry leading signal integrity performance.

Friday, July 5, 2013

flexibility QSFP to CX4 cable interface


Amphenol extensive experience in the design and manufacture of interconnection systems compliant InfiniBand proved crucial for the development of its new QDR InfiniBand cable qualified QSFP to CX4 cable turn Nick Blas, Product Marketing Manager for Amphenol Cables on request. “Does Amphenol has a rich heritage of participation in InfiniBand Trade Association-sponsored events, including Plugfest IBTA twice a year. Gagné This strategic partnership has produced Amphenol InfiniBand larger location on the IBTA Integrators List coveted a list of products tested and accepted by the IBTA as conforming to the InfiniBand ? architecture specification.

Thursday, July 4, 2013

CX4 Gigabit modules provide a high density

These cables have an QSFP connector on one end and a CX4 Gigabit on the other end of the cable. With a data rate of up to 5 Gpbs/channel they can be used for 4x InfiniBand and 10 Gbit Ethernet Active Optical CX4 Gigabit from DataStorageCables eliminate the need for a separate transceiver and cable.How Does CX4 Gigabit Compare with 10GBase-R & 10GBase-T?CX4 has numerous advantages over 10GBase-R (Fiber) and 10GBase-T An optical connection would require 10-Gig optical modules and a fiber patch cord to function. comparison of how CX4 Gigabit stacks up in terms of power-consumption in a 50-server datacenter. Essentially, CX4 Gigabit consumes at very low cost and reduced power budget.These cables have an QSFP connector on one end and a CX4 Gigabit on the other end of the cable in lengths up to meters. Custom lengths are available, as well as Low Smoke Zero Halogen cable material. For example, hybrid cables can connect between DDR adapters with CX4 Gigabit to high density switches with QSFP connectors. With a CX4 Gigabit, you can connect a VPI adapter card to a 10GigE switch.

Wednesday, July 3, 2013

fiber connector inter HP SFP 1.25G are compatible

ne, who wants to be a part of a competitive optical fiber industry, it ought to search the dependable source of supplying fibre optics products manually or via internet. Ingellen is a well-known center  HP SFP 1.25G modules combine high quality with low cost and will give you an ideal alternative The GLC-EX-SMD trancevier is high performance, cost effective modules supporting dual data-rate of  and 40km transmission distance with SMF. They are all fully compatible with SFP Multi-Source Agreement(MSA).effective fiber optic products for networking applications. For more information used in optical communications for both telecommunication and data bidirectional communications applications. It interfaces a network device mother board (for a switch, router or similar device) to a fiber optic or unshielded twisted pair networking cable. They simultaneously comply with Gigabit  Cisco HP SFP 1.25G is a next-generation transceiver module form factor specified by the ANSI T11 Group for 8.5 G bps and 10 G bps Fiber Channel and Ethernet applications. Similar to 1-4 G bps SFP modules, the SFP+ form factor is smaller than

Tuesday, July 2, 2013

Each Cisco QSFP to CX4 copper cable permits


Cisco QSFP to CX4 use cutting edge technology to provide an excellent hybrid cable solution for CX4/InfiniBand and QSFP rated switches, network adapters, and storage arrays. These cables have a QSFP connector on one end and a CX4 Connector on the opposite end. Each Cisco QSFP to CX4 copper cable permits auto-negotiation between the two connected devices for optimal network throughput. Reaching data rates of up 5Gpbs per channel. Compatible with 4x Infiniband SDR/DDR and 10 GbE applications.

higher than the Cisco QSFP to CX4 interface has


QSFP (Quad Small Form-factor Pluggable): four-channel SFP interface (QSFP), Cisco QSFP to CX4 born in order to meet the market demand for higher density of high-speed pluggable solutions.
The 4-channel pluggable interface transfer rate up to 40Gbps. A lot of the XFP mature key technologies are applied to the design.The QSFP can be as a fiber optic solutions, and the speed and density are better than a 4-channelCisco QSFP to CX4 interface. Support four channels of data transmission speed of 10Gbps per channel at the under XFP same port sizes, so the density of the QSFP can reach 4 times the XFP products, the SFP + product 3 times. Has 4 channels and the density is higher than the Cisco QSFP to CX4 interface has been adopted by the InfiniBand standard.

Cisco QSFP to CX4 interconnects offer the advantages of low-cost, low-latency, and low-power consumption at the expense of range. The length limitation for Cisco QSFP to CX4 is 15m (49ft) when using passive cable assemblies. Some novel solutions exist which use active signal boosters or fiber optics to achieve lengths beyond 15m, but these solutions negate the cost, latency, and power benefits inherent to Cisco QSFP to CX4 technology. Fortunately, lengths beyond 15m are rarely needed, since most switches reside in close proximity within a wiring closet.

Sunday, June 30, 2013

interface and the main body size of SFP is only about


come with a lifetime advance replacement warranty. SFP Interconnect Cable provide interconnection among switches, servers and routers with 1.25GbE SFP connectors to the Fibre Channel PCI Cards. They can also be used to connect the RAIDs with SFP connectors to most 2Gb and 4Gb Fibre Channel Switches.stock and can ship the Cisco SFP to you within 24 hours. All of our Cisco SFP are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition. We guarantee the Cisco SFP to work in your system  saving. Signal transmitting rate of these modules range from 100Mbps up to 4Gbps or more, working distance of these SFP transceiver modules can be from 500 meters to 100 kilo meters, working wavelength of different SFP modules are typically 850nm, 1310nm and 1550nm, there are also CWDM type SFP transceivers available.

 Facility Professional (SFP) credential. He has written, presented, and conducted workshops in the U.S. and internationally for IFMA (World Workplace), USGBC (GreenBuild), APPA, and numerous other organizations. Mr. Hodges is also a member of the adjunct faculty at George Mason University’s certificate program in facility management, and sustainability in existing buildings.

Friday, June 28, 2013

The QSFP transceiver module connects equipment where

These modules are designed to operate over multimode fiber systems using a nominal wavelength computing networks, enterprise core and distribution layers, and service provider transport applications. The QSFP transceiver module connects the electrical The transceiver is used primarily in short reach applications in switches, routers, and data center equipment where it provides higher density QSFP transceiver module is a data communication and interconnect applications. In addition to 40Gbps Ethernet Also you can have a wide selection of other transceivers at Fiberstore.com, including xfp transceivers, CFP modules, sfp transceivers and so on. It primarily enables high-bandwidth 40G optical links over ribbon fiber cables terminated with multi-fiber connectors, and could also be used Fiber Channel, InfiniBand and SONET/SDH standards with different data rate options. QSFP transceiver are designed to support Serial Attached

Thursday, June 27, 2013

natural color and sound mini-HDMI Cable provides

you will find the right HDMI cable either standard, mini HDMI or DVI to HDMI in the right length and quality here. We also offer iPad HDMI, HDMI cable 3D and Micro HDMI cable. mini HDMI cables and DVI to HDMI cable cater for all shapes, sizes and lengths. It doesn't matter if you are looking to buy a mini-HDMI cable for you camera or to buy The Mini-HDMI to VGA adapter/converter actively converts an HDMI Mini source video signal from your digital camera or tablet PC, onto a VGA projector or display. The adapter supports full 1080p resolutions, making it a convenient choice for applications requiring high-definition capability. As for all digital connection, including HDMI, the importance of a high quality cable should not Although digital singling is used in HDMI cables, there are tight tolerances in the used voltage, signal timing as well as auxiliary control signals.

Wednesday, June 26, 2013

Fiber Channel XFP transceiver is designed for single

XFP transceiver are designed to exceed OEM system requirements. All products are guaranteed 100% compatible and will not void OEM Service/support programs. The Cisco compatible fiber optic transceiver is compliant with the current XFP Multi-Source Agreement Specification The Cisco compatible 10GBASE-ER XFP  transceiver has a long transmission distance of up The Cisco compatible XFP fiber optic transceiver has a long transmission distance Overview iagnostics that provide a powerful optical management tool. 10Gbase  XFP is used with  laser optimized multimode fiber with max working span around 300 meters. The other three standards are all for single mode fiber Pluggable XFP transceiver modules. This functionality enables end users to tap into different network media and deploy different types of monitoring tools depending on the application. Net Optics offers a range of products that utilize XFPs including Port Aggregators, Link Aggregators, Bypass Switches

Tuesday, June 25, 2013


links can be bonded together for additional throughput Applications include inter-switch, switch to server and storage CX4 Cable are tested to a higher test standard than are InfiniBand cables.Therefore, CX4 cables are backwards compatible to Infinband, but Infiniband cables do not necessarily meet CX4 test standards.
TCS CX4 cables are designed for 10G Ethernet and are backwards compatible with Infiniband. TCS CX4 cables are assembled with premium 100 ohm, Madison 8 pair cable, and are available in lengths up to 15 meters. Standard connector type lin CX4 Cables - CX4 promises to provide the fastest transfer rates available for copper cables. The CX4 architecture specification defines a connection between processor nodes and high performance I/O nodes, such as storage 10Gbps CX4 cables provide an ultra high performance, cost effective solution for Gigabit Copper applications. Featuring 28AWG, The CX4 adapter supports copper CX4 cables. Cables can be ordered through a cable supplier. Attributes: The adapters TCS CX4 cables are designed for 10G Ethernet and are backwards compatible

Monday, June 24, 2013

The QSFP connector is a position and transceiver modules

 All cages use press-fit technology for board termination, and can be used in belly-to-belly (double-sided) applications. An XFP-style gasket is also supported to maintain the cage opening behind the bezel. All QSFP cages will accept copper The QSFP+ connector is a 38 position 0.8mm pitch surface mount connector, available in pocket short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. These breakout cables connect to a 40G QSFP+ port of a Cisco switch on one end and to four 10G SFP+ ports of a Cisco switch on the other end. Cisco currently offers passive cables in lengths of 1, 3 and 5 meters, and active cables in lengths of 7 and 10 meters. EMI between both cage-to-bezel and cage-to-module interfaces. Cages are available with options for riding heat sinks (similar to XFP) and lightpipes. Ganged (multi-port) cages are available for additional density gains.

Sunday, June 23, 2013

Some time from now we will shut down SFP

Leaving everyone in the cold who has been out there for us wouldn't be fair, therefor we will be playing one more show in our SFP offers the heating and ventilating industries a fast and reliable service supplying user friendly Smoke Free Partnership (SFP), which is shared with the European  key leadership role in creating, managing, and operating sustainable facilities. The SFP is the new credential for FMs seeking a higher level of sustainable performance.Severa

 Networks SFP are small form factor, hot-pluggable transceivers which allow for a single piece of network equipment to be connected to a multitude of interfaces, protocols, and transmission media via the SFP port.transceiver used for both telecommunication and data communications applications. It interfaces a network device mother board (for a switch, router, media converter or similar device) to a fiber optic or copper networking cable. It is a popular industry  l companies have formed a consortium supporting the use of SFP transceivers to meet their common objectives of broad bandwidth, small physical size and mass, and ease of removal and replacement.

Friday, June 21, 2013

which block any emissions XFP optical transceiver

typically used in conjunction with an XFP cage, flange and  gasket assembly, along with a heat sink and attachment clip, to connect an optical LC duplex or electrical XFP transceiver module to the host board. The right-angle interconnect is  an panel with compliant pins for pressing onto the host PCB. The cage assembly features four gaskets, which block any emissions emanating from the transceiver when installed. The front flange provides a flat surface to contact the  gasket (attached to the perimeter of the bezel cutout) and stabilizes the cage assembly during insertion and extraction of the transceiver.

Thursday, June 20, 2013

Ingellen offers many kinds of Outdoor Fiber Optic Cable

Indoor Fiber Optic cable is specifically used for patching applications is typically more robust in design, and capable of superior flex and crush requirements. A majority of indoor cable is used in building wiring applications. Installed in walls, between floors, in plenum air handling ducts and under data center floors. Ingellen fiber cable used in building wiring applications is built to withstand the tensile stresses present during installation by the contractor, and once installed, will provide a safe shroud for many years of trouble-free glass use. Usually the single mode indoor fiber optic cables are installed between the buildings where the distance is more than 100 meters, while multimode indoor fiber optic cables connection shorter distance. Ingellen supply SMF and MMF indoor fiber cables with various structures for different applications.
FTTH indoor cable is put the optical communication unit in the center, both sides parallel place two root non-metallic strengthen members (FRP) or metal strengthen component such as steel wire, finally squeeze the black color LSZH sheath into cable. FTTH indoor cables are used inside buildings or houses, connects to the FTTH user end equipment. FTTH indoor cables are small diameter, water-resistant, soft and bendable, easy to deploy and maintenance. Special indoor FTTH cables will also meet the requirement of thunder-proof, anti-rodent or waterproof.

Wednesday, June 19, 2013

Mellanox SFP+ Cables is a professional supplier

 SFP+ Cables are a dependable choice for linking telecom and data communications equipment, such as routers and switches, in Gigabit Ethernet and Fibre Channel applications.We use the highest quality Madison cable and every cable are designed for 10G data.  Using a SFP+ Cables reduces the cost
when compared to 2 Optical SFP+ transceivers and a fiber cable by up to 80%.  The pull tab is also designed for easy disconnection in high density configurations
10GBASE SFP+ Cables offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet and service provider transport applications, such as switches, routers, media converters, and other data communication equipments.

Tuesday, June 18, 2013

QSFP+ Loopback adapter modules are used for testing

In addition to the electrical loopback function, the QSFP/QSFP+ provides an MSA standard 2-wire serial communication interface to digital diagnostics and preloaded EEPROM two-page memory map. The QSFP+ Loopback also contains a two-colored LED indicator that displays the operating status of the module. The electrical loopback provides a cost effective method for QSFP port testing. Transmitting data from the host is electrically routed (internally to the loopback module) to the receive data outputs and back to the host. Since the QSFP+ Loopback module does not contain laser diodes or photodiodes, it provides a very cost-effective way to test QSFP port Buy Compatible QSFP+ Loopback from China factory, ship in 1 day, Return & Refund, Offer Twinax Copper,QSFP/QSFP+ Passive Electrical Loopback EOLQ-XLB is used for testing QSFP/QSFP+ transceiver ports in board level test. The electrical loopback provides a cost effective low loss method for QSFP/QSFP+ port testing. The EOLQ-XLB is packaged in a standard MSA housing compatible with all QSFP/QSFP+ ports. Transmit data from the host is electrically routed,

Monday, June 17, 2013

TMC's CX4 cables are available is various lengths


CX4 cable provide connectivity between devices using CX4 ports. CX4 offers point-to-point bidirectional serial links intended for the connection of processors with high-speed peripherals such as disks. FiberStore supply CX4 to CX4 Cables in different length, and they are compliant with the InfiniBand Architecture, SFF-8470 specifications. Our CX4 Cable  provide the fastest transfer rates to offer scalable and cost effective solution for testing 10G and Infiniband ports.InfiniBand specification, the main difference being that InfinaBand uses equalization for longer distances while CX4 cables are passive at all Elpeus manufactures a large selection of CX4 cables, including CX4 to QSFP hybrid cables, CX4 Jackscrew to Latch cables, and standard CX4 cables with latches on both ends. For distances longer than 15 meters we carry Optical Cx4 cables which can reach up to 300 meters.

Module Now On Sale SFP Loopback Adapter Modules

driver circuitry. In this way, the host can determine if there is a problem with the port being tested. SFP Loopback used for testing on network hubs and other systems using MSA-compliant Small Form-factor Pluggable (SFP) optical transceivers. These loopbacks test port operation in equipment where SFP transceivers are to be installed in applications such as Ethernet, SONET, or Fiber Channe. SFP Loopback have no optical inputs or outputs, as the electrical signals are simply received and then looped back to the port driver circuitry. In this way, the host can determine if there is a problem with the port being tested.SFP Loopback Adapter Module Now On Sale SFP Loopback Adapter Modules by Amphenol provide a quick and easy port testing solution for all copper and optical capable SFP+ (Small Form Factor Pluggable Plus) equipped adapter boards, cages, expansion modules, switches, routers, and servers.
SFP Loopbacks are used for testing on network hubs and other systems using MSA-compliant Small Form-factor Pluggable (SFP) optical